Hitachi WJ200 Series - Page 364

B−35
Register
No.
Function name Function code R/W Monitoring and setting items
Data
resolution
12B0h
Operation-target frequency
selection 2
A142 R/W
0 (digital operator), 1 (keypad potentiometer),
2 (input via O), 3 (input via OI), 4 (external
communication), 5 (option ), 7 (pulse train
frequency input)
-
12B1h Operator selection A143 R/W
0 (addition: A141 + A142), 1 (subtraction:
A141 - A142), 2 (multiplication: A141 x A142)
-
12B2h (Reserved) - - - -
12B3h
Frequency to be added
A145 (high) R/W
0 to 40000(100000) 0.01 [Hz]
12B4h A145 (low) R/W
12B5h
Sign of the frequency to be
added
A146 R/W
00 (frequency command + A145), 01
(frequency command - A145)
-
12B6h to
12B8h
(Reserved) - - - -
12B9h
EL-S-curve
acceleration/deceleration
ratio 1
A150 R/W 0 to 50 1 [%]
12BAh
EL-S-curve
acceleration/deceleration
ratio 2
A151 R/W 0 to 50 1 [%]
12BBh
EL-S-curve
deceleration/deceleration
ratio 1
A152 R/W 0 to 50 1 [%]
12BCh
EL-S-curve
deceleration/deceleration
ratio 2
A153 R/W 0 to 50 1 [%]
12BDh
Deceleration hold
frequency
A154 (high)
R/W 0～40000(100000) 0.01 [Hz]
12BEh A154 (low)
12BFh Deceleration hold time A155 R/W 0～600 0.1 [sec.]
12C0h
PID sleep function
triggering level
A156 (high)
R/W 0～40000(100000) 0.01 [Hz]
12C1h A156 (low)
12C2h
PID sleep function action
delay time
A157 R/W 0～255 0.1 [sec.]
12C3h to
12C5h
(Reserved) - - - -
12C6h
[VR] input active range start
frequency
A161 (high)
R/W 0～40000(100000) 0.01 [Hz]
12C7h A161 (low)
12C8h
[VR] input active range end
frequency
A162 (high)
R/W 0～40000(100000) 0.01 [Hz]
12C9h A162 (low)
12CAh
[VR] input active range
start %
A163 R/W 0～100 1 [%]
12CBh
[VR] input active range
end %
A164 R/W 0～100 1 [%]
12CCh
[VR] input start frequency
select
A165 R/W 0(start frequency A161) / 1(0Hz) -
12CDh to
1300h
unused - - Inaccessible -