EasyManua.ls Logo

Hitachi WJ200 Series - Page 368

Hitachi WJ200 Series
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B39
Register
No.
Function name
Function
code
R/W Monitoring and setting items
Data
resolution
1375h to
137Ah
(Reserved) - - - -
137Bh Brake Control Enable b120 R/W 0 (disabling), 1 (enabling) -
137Ch Brake Wait Time for Release b121 R/W 0 to 500
0.01
[sec.]
137Dh Brake Wait Time for Acceleration b122 R/W 0 to 500
0.01
[sec.]
137Eh Brake Wait Time for Stopping b123 R/W 0 to 500
0.01
[sec.]
137Fh Brake Wait Time for Confirmation b124 R/W 0 to 500
0.01
[sec.]
1380h Brake Release Frequency b125 R/W 0 to 40000 0.01 [Hz]
1381h Brake Release Current b126 R/W 0 to 2000 0.1 [%]
1382h Braking frequency b127 R/W 0 to 40000 0.01 [Hz]
1383h (Reserved) - - - -
1384h (Reserved) - - - -
1385h
Deceleration overvoltage
suppression enable
b130 R/W
0 (disabling), 1 (enabling), 2 (enabling with
acceleration)
-
1386h Decel. overvolt. suppress level b131 R/W
200 V class: 330 to 390 (V)
400 V class: 660 to 780 (V)
1 [V]
1387h Decel. overvolt. suppress const. b132 R/W 10 to 3000
0.01
[sec.]
1388h
Decel. overvolt. suppress
propotional gain
b133 R/W 0 to 500 0.01
1389h
Decel. overvolt. suppress Integral
time
b134 R/W 0 to 1500 0.1 [sec.]
138Ah to
1393h
(Reserved) - - - -
1394h
GS input mode
b145 R/W 0(non Trip) /1(Trip)
1395h
1399h
(Reserved) - - -
139Ah Display ex.operator connected b150 R/W 001 to 060
139Bh
13A2h
(Reserved) - - -
13A3h
1st parameter of Dual
Monitor
b160 R/W 001 to 030
13A4h
2nd parameter of Dual
Monitor
b161 R/W 001 to 030
13A5h
(Reserved) - - -
13A6h
Freq. set in monitoring
b163 R/W 0 (disabling), 1 (enabling),
13A7h
Automatic return to the initial
display
b164 R/W 0 (disabling), 1 (enabling),
13A8h Ex. operator com. loss action b165 R/W
0 (tripping), 1 (tripping after decelerating and
stopping the motor), 2 (ignoring errors),
3 (stopping the motor after free-running),
4 (decelerating and stopping the motor)
13A9h
13ADh
(Reserved) - - -
13AEh
Inverter mode selection
b171 R/W
0 (disabling), 1 (IM mode), 2 (High Freq.
mode)
13AFh
13B6h
(Reserved) - - -
13B7h
Initialization trigger
b180 R/W 0 (disabling), 1 (enabling),
13B8h
1400h
unused - - Inaccessible -

Table of Contents

Other manuals for Hitachi WJ200 Series

Related product manuals