8. Operation
8.8 Lifting with the jib
Use the jib for a lift if:
l
the load is not too heavy (see Appendix),
l
you need to repeat the same lift many times,
l
you need a high versatility, i.e. you need to lift:
l
over things (walls, embankments)
l
under things (ceilings, balconies, soffits)
l
you need a long reach.
For more information on how to install a jib (see 7.9.1 Installing the jib).
8.8.1 Controls
Make sure that the superstructure is active (LED is ON).
A. Extend / Retract jib,
B. Lower / raise jib.
(see 5.3.1 Default configuration)
106 U.C30e.00.00.EN Version