HOEFLON C30e - General; 110% Button; Personnel

2. Safety
2.2.1 General
If a sensor does not give an indication, speak to your Hoeflon dealer or to Hoeflon Support B.V. immediately.
Do not:
l
continue working.
l
remove, bypass or disable safety equipment.
l
remove, bypass or disable a sensor.
l
change the pressure settings.
l
change the motor speed.
Changing safety equipment, sensors, settings or speeds can lead to dangerous situations and damage to the
crane. Any such changes will void the warranty immediately.
2.2.2 110% button
Use the 110% button only to return the crane to a safe situation (see 5.2.3 110% button)
Do not:
l
use the 110% button to increase the crane’s outreach.
l
use the 110% button to continue lifting.
2.3 Personnel
Note
Make sure that all personnel that works with the crane has the necessary licenses and work
permits as specified by your local laws on training and equipment competence.
Caution
Always use approved Personal Protective Equipment (PPE).
l
Hardhat
l
Safety shoes
l
Gloves
l
Safety glasses
4 U.C30e.00.00.EN Version