HOEFLON C30e - The LED Does Not Flash; The LED Stops Flashing and Goes off; Replacing and Charging the Remote Control Battery

5.6 Replacing and charging the remote control battery
3. Push the Connect button (A).
4. Look if the LED on the button flashes.
l
If the LED flashes the RC6 is trying to connect to the crane.
l
If the LED does not flash, then there is a problem with the RC6.
l
When the light is ON, the RC6 is connected to the crane.
l
If the LED goes OFF, the RC6 cannot connect.
5.5.1 The LED does not flash
There is a problem with the RC6.
1. Make sure that all the levers are in the central position.
2. Calibrate the RC6 if all the levers are in the central position (see 5.3.2 Calibration)
3. Do an inspection of the Connect button (A).
4. Speak to your your Hoeflon dealer if you still cannot connect.
5.5.2 The LED stops flashing and goes OFF
There is a problem with the compact crane. Speak to your Hoeflon dealer. Do not continue working.
5.6 Replacing and charging the remote control battery
1
2
1
1. Push in the two clips (1) on the remote control
next to the battery (2).
2. Remove the discharged battery (2) from the
remote control.
3. Push the charged battery in position.
l
The clips lock in position, listen for the "click"
User guide - C30e Compact crane 59