10. Troubleshooting
10.4 Fuses and relays
10.4.1 Replace a broken fuse or relay
1. Stop the crane and remove the key.
2. Remove the compartment cover, (see 4.7.1
Remove the cover of the compartment at the rear
of the crane).
3. Turn the power switch (1) to disconnect the 24V
battery.
4. Push the clips on the side of the fuse box (2) and
remove the cover.
5. Replace the broken fuse or relay.
6. Close the cover of the fuse box and attach the two
clips.
7. Reconnect the battery with the switch.
8. Put the compartment cover back in position..
146 U.C30e.00.00.EN Version