HOEFLON C30e - Page 6

7.9 The jib 75
7.9.1 Installing the jib 75
7.9.2 Removing the Jib 77
7.10 Attaching an attachment 78
7.10.1 Lifting adapter and hook 78
7.10.2 Angle adapter 80
7.10.3 Searcher hook 81
7.10.4 Winch head 81
7.11 Prepare the crane for use with the winch 82
7.11.1 Identify the winch 83
7.11.2 Move the winch cable in position 85
7.11.3 Attaching the hook block 87
7.11.4 Reeving with the winch head 91
7.11.5 Attaching the hook block with 2 x reeving 92
7.12 Extending a carrier arm 96
8. Operation 99
8.1 Planning the lift 99
8.2 Different ways to lift a load 99
8.3 Guiding the load 100
8.4 Bridging device 100
8.5 Emergency stop 101
8.5.1 Location 101
8.5.2 Operation 101
8.5.3 Error codes 101
8.5.4 Restart the crane after an emergency stop. 101
8.6 Boom and jib section interlock 102
8.6.1 Activating the boom section interlock 102
8.6.2 Removing the boom section interlock 103
8.6.3 Activating the jib section interlock 103
8.6.4 Removing the jib section interlock 104
8.7 Lifting the load with the boom 104
8.7.1 Controls 105
8.7.2 Maximum angle of the boom when lifting with the hook 105
8.8 Lifting with the jib 106
8.8.1 Controls 106
8.8.2 Maximum angle of the jib when lifting with the hook 107
8.8.3 Searcher hook positions in the angle adapter 107
8.8.4 Maximum angle of the jib with the searcher hook 108
8.9 Remove the winch roll 108
8.10 Lifting with the jib and the winch 109
U.C30e.00.00.EN Version