106
Configuration
Viewing a List of Sectors
• Select 6 Function Programming 4 List PS/PT/Sectors 3
Sectors.
The list is generated on screen of all
programmed sectors
Deleting a Sector
1. Select 6 Function Programming 7 Delete
PS/PT/MT/Sectors.
2. Locate and select the applicable sector number.
The message Delete Success displays or if the selected
function and number is not programmed, the message Does
Not Exist displays instead.
Existing programming does not have to
be deleted to be reprogrammed. You can
edit the coordinates for an existing sector
by following the programming procedure
Task/Action (with Default) Notes
To Next Page
Loading...
