84
Configuration
Selecting the High or Low Light WB Mode
1. Select 5 Camera Options 4 White Balance
•1 High Light WB Mode
• 2 Low Light WB Mode
2. Select:
• AUTO (default) to avoid fixing single color scenes as white.
Auto Tracing White Balance with limitations on R and B
gain (3,200°K to 6,000°K).
• ATW to turn the dominant color within the temperature
color range to white. Auto Tracing White Balance (2,000°K
to 10,000K°).
• Indoor to set the white balance to 3200°K.
• Outdoor to sets the white balance to 5800°K.
Available with camera models HDXA,
HDXJ and HDXF (NOT HDXG).
Selecting a Gain Setting/Shutter Speed for High or Low Light 28 dB
1. Select 5 Camera Options 4 White Balance
• 3 Enter High Light 28dB
• 4 Enter Low Light 28dB
2. Select a Gain Setting between 0 and 28 dB.
3. Select a Shutter Speed:
PAL cameras (high light default is 1/50 sec; low light default
is1/25 sec)
1/3 sec, 1/6 sec, 1/12 sec, 1/25 sec, or 1/50 sec
NTSC cameras (high light default is 1/60s; low light default is
1/30 s):
1/4 sec, 1/8 sec, 1/15 sec, 1/30 sec, or 1/60 sec
Available with camera models HDXA,
HDXJ and HDXF. (NOT HDXG)
The high light level mode cannot be set
lower than the low light level mode and
conversely, the low light level mode
cannot be set higher than the high light
level mode.
Turning the Manual White Balance ON or OFF
1. Select 5 Camera Options 4 White Balance [1 or 5]
Manual White Balance
2. Select ON or OFF (default).
For model HDXG, if set to ON, the red and blue gain settings
can be changed. If set to OFF, the red and blue gain settings
can be changed but the settings do not take affect until the
manual white balance is set back to ON.
Available with all camera models.
For models HDXJ and HDXF, the menu
selection is 5 Manual White Balance.
For HDXG, menu selection is 1 Manual
White Balance.
Task/Action (with Default) Notes
To Next Page
Loading...
