108
System Administration and Equipment Handling
Changing a 4-Digit User or Privacy Zone Login PIN
1. Press 75 Preset.
2. Enter the 4-digit PIN. The default is 1000.
3. Select 2 Change PIN.
4. Enter a new PIN.
5. Re-enter the PIN to verify as above.
If you enter the wrong 4-digit number, Invalid PIN, try again displays and the
dome returns to the Enter PIN screen.
If you entered the correct PIN, PIN changed displays and the Password Settings
menu opens.
Recovering an Encrypted User or Privacy Zone Login PIN
1. Press 75 Preset.
An encrypted PIN number displays on the monitor.
2. Write down the number.
3. Contact Honeywell Technical Support to recover the actual PIN.
Resetting a Privacy Zone Password (Diamond or IntelliBus Only)
Note Up to a 24-alphanumeric characters can be programmed as a password. The
default password is a blank line.
1. Press 75
Preset enter the current alphanumeric password.
2. Select 3 Reset Privacyzone Password.
The password is reset to the factory default password, which is blank. To enter a
blank password, press Enter at the password prompt.
To Next Page
Loading...
Need help?
General
