Document 800-05662 Rev C 73
06/10
Configuration
In this section:
• Opening and Displaying the OSD Camera Menu, page 73
• Configuring Display Settings, page 75
• Configuring the Pan, Tilt and Zoom (PTZ) Dome Settings, page 78
• Configuring the Image Quality and Video Display Settings, page 80
• HDXG Cameras: Configuring Camera Settings, page 86
• Configuring Contacts/Alarms, page 91
• Configuring the Controller Settings - Pan and Tilt Reverse, page 95
• Configuring the Lift and Gain Settings and PWM, page 96
• Configuring Mimic Tours, page 97
• Configuring Default Functions: Presets and Tours, page 98
• Configuring Presets and Preset Tours, page 99
• Configuring Privacy Zones, page 102
• Configuring Sectors, page 105
Opening and Displaying the OSD Camera Menu
Open the OSD by pressing 90 Preset.
After each step it is assumed that you exit and save after each task using the applicable
method based on the protocol and controller.
To Next Page
Loading...
Need help?
General
