ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662 Rev C 123
06/10
Factory Defaults
Where applicable, the following lists the configuration and installation factory defaults. For
the different camera models (HDXA, HDXJ, HDXF and HDXG) it is noted where it is
different. Some OSD menu items do not have factory defaults and these are not listed.
Table A-11 ACUIX Factory Defaults
Menu/Feature Factory Default
OSD Menu
-5 degree tilt limit OFF
Auto focus mode Z
Auto pivot OFF
Backlight compensation (BLC) OFF
Camera msg display ON
Digital zoom mag OFF
Date display OFF
Dome name location Top left
Display crosshairs OFF
Display dome pressure OFF
Display dome temperature OFF
Display error display tables OFF
Display pan and tilt coordinates OFF
Display preset titles ON, top of monitor
Display run time counter OFF
Display sector ID titles OFF
Display temperature in Fahrenheit or Celsius Fahrenheit
Exposure level 7
Find mechanical home on startup OFF
Gain, red or blue HDXA/HDXJ/HDXF: 200
HDXG: 128
Shutter speed for high light 28 db HDXA/HDXJ/HDXF:NTSC 1/60s;
PAL: 1/50 s
HDXG: not available
To Next Page
Loading...
Need help?
General
