ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662 Rev C 69
06/10
Accessing Special Presets
Press [preset number] Preset button on the controller.
Step 5: Open the OSD Menu and Start Configuring
Note The availability of an OSD menu item is based on both the protocol and the
camera model.
Note If the password feature is enabled the Login screen displays first and a
password is required to access the OSD.
94 Toggles between standard operation and
NightShot mode (camera dependent)
MAXPRO-mode, VCL, VCL UTC, Pelco D or P
95 Toggles between freezing and unfreezing the
video (camera dependent)
•Press 95
Preset to toggle between
freezing and unfreezing the current video
scene.
96 Run the Flashback function
•Press 96
Preset to toggle between two
saved positions and quickly return to a
scene of interest.
98 Camera lens reset or cycles the power (camera
dependent)
All
Table 4-3 Special Presets Based on Protocol
Preset Function Protocol
To Next Page
Loading...
Need help?
General
