SEL Record Log 122
Table 10-2 Class: HP_CommonRecordLog Properties
Property name Property implementation
OperationalStatus OperationalStatus[0] indicates the highest severity of
IPMI SEL log entries and will contain one of the
following:
• 2 (OK), only informational or repaired events exist
in the IPMI SEL log
• 3 (Degraded), at least one degraded event exists
in the IML log
• 6 (Error), at least one critical event exists in the
IPMI SEL log
StatusDescriptions StatusDescriptions[0] contains one of the following
corresponding to OperationalStatus[0]:
• Local SEL log status is OK
• Local SEL log status is DEGRADED
• Local SEL log status is FAILED
• 5 (OK), when OperationalStatus[0]=2 (OK)
HealthState
• 10 (Degraded), when OperationalStatus[0]=3
(Degraded)
• 20 (Major Failure), when OperationalStatus[0]=6
(Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledState 2 (Enabled)
RequestedState 5 (No Change)
EnabledDefault 2 (Enabled)
CIM_Log
MaxNumberOfRecords Maximum number of records in the IPMI SEL for this
platform. 0 indicates this is not supported.
Number of records in the SEL log
(HPQ_CommonLogEntry instances)
CurrentNumberOfRecords
LogState 2 (Normal)
OverwritePolicy 2 (Wraps When Full) The log is erased when full.
However, log is backed up to a file before it is erased.
CIM_RecordLog
InstanceID HPQ:HPQ_CommonRecordLog
HP_CommonRecordLog
Date and time, when the log was cleared
recently.
LastLogClearedTime
Default value is 30 days.
LogBackUpDays
Percentage of log currently used.
LogPercentFull
TimeOfLastChange Time of last log change
To Next Page
Loading...
Need help?
General