HP Integrity BL860c Datasheet

Ethernet Teaming 168
Table 13-31 Optional HP_AlertIndication: Ethernet Team Member Status Change
Property name Property implementation
CIM_AlertIndication
Description An Ethernet Team member’s status has changed. This is
an optional indication that can be disabled through the
Ethernet Event Provider settings.
AlertingManagedElement WBEM path of the Ethernet Team
(HP_WinEthRedundancySet), reporting a member status
change.
AlertingElementFormat 2 (CIMObjectPath)
AlertType 2 (Communications Alert)
Event Id 10
ProbableCause 1 (Other)
ProbableCauseDescription Ethernet Team Member Status Change
Provider Name HP Ethernet
RecommendedActions[] View the Ethernet and Ethernet Team Member status in
the HP Network Configuration Utility (NCU). View the
System Event Log for additional information.
SystemCreationClassName CreationClassName of the computer system generating
the indication
SystemName Name of the computer system generating the indication
HP_AlertIndication
Summary Ethernet team member reported status change
EventCategory 9 (Network Device)
EventSubCategory 12 (Ethernet Team)
NetworkAddresses A list of all the IP addresses (IPv4 and IPv6) of the
computer system generating the indication
• 70 (Windows Server 2003 64-bit)
OSType
• 77 (Windows Server 2008 64-bit)
• 103 (Windows Server 2008 R2)
OSVersion Operating system version of the computer system
generating the indication in the format,
major.minor.build
ProviderVersion Provider version generating the indication in the form,
major.minor.revision.build.
SystemFirmwareVersion Firmware version of the computer system generating
the indication
SystemGUID Platform GUID of the computer system generating the
indication
SystemModel Model name of the computer system generating the
indication

HP Integrity BL860c Specifications

General

Brand	HP
Model	Integrity BL860c
Category	Server
Language	English