HP Integrity BL860c Datasheet

Smart Array 196
Table 15-6 Class: HPSA_StorageExtent (CIM_StorageExtent)
Property name Property implementation
CIM_ManagedElement
ElementName Disk location. This property contains the relative ports
and box information. For example, Port:m1,m2
Box:n1,n2, where m1 is the active port, m2 is the
passive port number, n1 is the box number relative to
the active port, and n2 is the box number relative to
the passive port.
Caption
Disk location. For example, Port:m1,m2 Box:n,
where m1 is the active port, m2 is the passive port
number, and n is the box number in which the drive is
located.
CIM_ManagedSystemElement
Name Serial number of drive
OperationalStatus[0] Operational Status for the disk drive
• 0 (Unknown)
• 2 (OK)
• 5 (Predictive Failure)
• 6 (Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_LogicalDevice
CreationClassName HPSA_StorageExtent
DeviceID Opaque ID
SystemCreationClassName HPSA_ArraySystem
SystemName HPSA_ArraySystem.Name
TotalpowerOnHours Total service hours reported for the disk drive.
CIM_StorageExtent
BlockSize Block size in bytes
ConsumableBlocks Total number of blocks on disk drive
ExtentStatus[0] This indicates extended status for the disk drive
Possible values:
• 2 (None)
• 11 (Rebuild – disk drive is currently rebuilding
data)
NumberOfBlocks Total number of blocks on disk drive

HP Integrity BL860c Specifications

General

Brand	HP
Model	Integrity BL860c
Category	Server
Language	English