HP Integrity BL860c - LAN;NIC Configuration and SAS Adapter Setup; MPTUTIL Utility for Firmware Updates

System Power Supply 51
Table 4-2 Class: HP_PowerSupply
Property name Property implementation
Caption
Power Supply n: Location, where n is the power
supply instance.
Example:
PowerSupply 4:cabinet 0 - bulk pwr sp 3
Description
Power Supply n: Location provides power for
system. StatusDescription, where n represents
the number of the power supply instance and
StatusDescription represents the value of
StatusDescriptions[0].
Example:
PowerSupply 4:cabinet 0 - bulk pwr sp 3
provides power for system. Power Supply
is operating properly.
ElementName
Power Supply n: Location, where n is the power
supply instance.
Example:
PowerSupply 4:cabinet 0 - bulk pwr sp 3
CIM_ManagedSystemElement
• 2 (OK)—if the power supply is operating properly
OperationalStatus[0]
• 6 (Error)—if the power supply has failed
• Power Supply is operating properly—if
OperationalStatus[0] is 2 (OK)
StatusDescriptions[0]
• Power Supply has failed—if OperationalStatus is
6 (Error)
• 5 (OK)—if the power supply is operating properly
HealthState
• 20 (Major Failure)—if the power supply has failed
Name
Power Supply n, where n represents the number of the
power supply instance.
CIM_LogicalDevice
CreationClassName HP_WinPowerSupply
DeviceID
Power Supply n, where n is a Unique identifier for
this power supply instance.
SystemCreationClassName HP_ComputerSystem.CreationClassName
SystemName HP_ComputerSystem.Name
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_PowerSupply
TotalOutputPower 0 (denotes unknown)
HP_PowerSupply