System Temperature Sensor 76
Table 6-2 Class: HP_NumericSensor
Property name Property implementation
Description
Temperature Sensor n:Location detects for
NumericSensorType. StatusDescription,
where n represents the number of the temperature
sensor instance, NumericSensorType represents the
value of NumericSensorType, and
StatusDescription represents the value of
StatusDescriptions[0]
ElementName
Temperature Sensor n:Location, where n represents the
number of the temperature sensor instance.
CIM_ManagedSystemElement
• 2 (OK)—if temperature reported by the sensor is
within normal operating range
OperationalStatus[0]
• 2 (OK)—if temperature reported by the sensor has
exceeded its non-critical threshold and has set
fans to full speed
• 6 (Error)—if temperature reported by the sensor
has exceeded its threshold and the system is
gracefully shutting down
StatusDescriptions[0]
• Temperature reported by the sensor
is within normal operating range—if
temperature reported by the sensor is within
normal operating range;
• Temperature reported by the sensor
has exceeded its non-critical
threshold and the fans have been set
to full speed—if temperature reported by the
sensor has exceeded its threshold and has set fans
to full speed;
• Temperature reported by the sensor
has exceeded its threshold and the
system is gracefully shutting down—
if OperationalStatus is 6 (Error)
• 5 (OK)—if OperationalStatus[0] value is 2 (OK);
HealthState
• 20 (Major Failure)—if OperationalStatus[0] value
is 6 (Error)
Name
Temperature Sensor n:Location, where n represents the
number of the temperature sensor instance.
CIM_LogicalDevice
CreationClassName HP_WinNumericSensor
DeviceID
Temperature Sensor n, where n is a unique identifier
for this temperature sensor instance.
SystemCreationClassName HP_ComputerSystem.CreationClassName
SystemName HP_ComputerSystem.Name
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
To Next Page
Loading...
Need help?
General