HPE FlexNetwork 5510 HI Series User Manual

552
optimizing RIPng network, 392
permitting BGP local AS number appearance
(IPv4), 251
permitting BGP local AS number appearance
(IPv6), 251
protecting EBGP peer (low memory
exemption)(IPv4), 276
protecting EBGP peer (low memory
exemption)(IPv6), 276
redistributing BGP IGP route, 226
redistributing OSPF route (another routing
protocol), 83
redistributing OSPF route (default route ), 84
removing BGP private AS number from EBGP
peer/peer group update (IPv4), 255
removing BGP private AS number from EBGP
peer/peer group update (IPv6), 255
resetting IPv4 BGP sessions, 302
resetting IPv6 BGP sessions, 302
saving BGP route update (IPv4), 272
saving BGP route update (IPv6), 272
setting BGP outgoing packet DSCP value, 278
setting BGP received route preferred value
(IPv4), 241
setting BGP received route preferred value
(IPv6), 241
setting IP routing ECMP route max number, 5
setting IP routing FIB route max lifetime, 4
setting IP routing RIB label max lifetime, 4
setting IP routing RIB route max lifetime, 4
setting IPv6 IS-IS LSDB overload bit, 468
setting IPv6 PBR node match criteria, 485
setting IS-IS ATT bit Level-1 LSP, 155
setting IS-IS IS+circuit level, 142
setting IS-IS LSDB overload bit, 154
setting maximum number of OSPFv3 logs,
428
setting OSPF ECMP routes max, 82
setting OSPF exit overflow interval, 91
setting OSPF interface max packet length, 93
setting OSPF log count, 96
setting OSPF LSA arrival interval, 87
setting OSPF LSA generation interval, 87
setting OSPF LSA transmission delay, 86
setting OSPF LSDB external LSAs max, 90
setting OSPF LSU transmit rate, 93
setting OSPF outgoing packet DSCP value,
90
setting OSPF preference, 83
setting OSPF timer, 85
setting OSPFv3 ECMP route max, 420
setting OSPFv3 LSA generation interval, 423
setting OSPFv3 LSA transmission delay, 422
setting OSPFv3 SPF calculation interval, 423
setting OSPFv3 timer, 422
setting PBR node match criteria, 371
setting RIP ECMP route max number, 35
setting RIP outgoing packet DSCP value, 39
setting RIP packet max length, 38
setting RIP preference, 33
setting RIP triggered update interval, 37
setting RIPng ECMP route max, 394
setting RIPng preference, 391
setting RIPng timer, 392
setting RIPng triggered update send interval, 395
specifying AS number and router ID for BGP LS
messages, 296
specifying BGP TCP connection source address
(IPv4), 223
specifying BGP TCP connection source address
(IPv6), 223
specifying IS-IS CSNP packet send interval, 149
specifying IS-IS hello multiplier, 149
specifying IS-IS hello packet send interval, 148
specifying IS-IS LSP length, 152
specifying IS-IS preference, 144
specifying OSPF SPF calculation interval, 87
specifying PBR policy, 372
specifying PBR policy (interface PBR), 373
specifying PBR policy (local PBR), 372
specifying RIP neighbor, 37
triggering OSPF GR, 100
triggering OSPFv3 GR, 430
troubleshooting BGP peer connection state, 368
troubleshooting OSPF incorrect routing
information, 133
troubleshooting OSPF no neighbor relationship
established, 132
tuning BGP network, 258
tuning IP routing OSPF network, 85
tuning IP routing RIP networks, 34
tuning IPv6 IS-IS network, 467
tuning IS-IS network, 148
tuning OSPFv3 network, 422
tuning RIPng network, 392
profile
OSPFv3 IPsec profile application, 433
OSPFv3 IPsec profile configuration, 460
protecting
EBGP peer (low memory exemption)(IPv4), 276
EBGP peer (low memory exemption)(IPv6), 276
protocols and standards
BGP, 204

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English