HTA HT2800T - Page 124

HT2800T_en_c.doc Page 124 of 275
0 “Select “Exit” to exit from this screen and return to the “Setup Configuration”” screen
(see paragraph 4.2.6 “Setup: Configuration”):
Setup configuration: Input Output“);
• Maintenance: displays information and changes settings about preventive maintenance
counters (see paragraph 4.2.6.5 “Setup configuration: Maintenance“);
Advanced: edits the advanced parameters of the autosampler (see paragraph 0 “ Select
“Exit” to exit from this screen and return to the “Setup Configuration”” screen (see
paragraph 4.2.6 “Setup: Configuration”):
• Setup configuration: Advanced“);
• Activation: enables the optional features of the autosampler (see paragraph
4.2. 6. 7”Setup configuration: Activation“).