HTA HT2800T - Page 19

HT2800T_en_c.doc Page 19 of 275
Injection speed from 0.5 to 100ml/min (40ml/min for 1ml syringe)
Pre/Post injection dwell time from 0 to 99secs
Enrichment cycles up to 15
Dwell time between enrichment cycle from 0 to 100min
Syringe purge
Flush time from 0 to 99min
Purge temperature off, from 40°C to 150°C
LIQUID MODE
General
Tray capacity 121 vials (2ml)
Volume Increment/Decrement According to syringe type
Pre&Post wash
Number of washes up to 15
Wash mode each injection, each sample or step
Wash with sample
Sample wash up to 15
Bubble elimination up to 15 strokes
Sampling withdrawal
Sample Volume According to syringe type
Air Volume According to syringe type
Aspiration speed According to syringe type
Viscosity time from 0 to 15secs
Injection
Injection speed According to syringe type
Waiting time before and after injection from 0 to 99secs
Internal Standard Techniques
Mode no, post or double
SPME MODE