HT2800T_en_c.doc Page 22 of 275
• LIQUID MODE:
LOCATION FOR SOLVENT VIALS
The incubation oven/Location for solvent vials may be located on the left or right side of the
autosampler, depending on how the autosampler is configured. Left/Right side configuration is
factory set.
5. INJECTION AREA: region where an injection can be made. The injection area may also be
located on the left or right side of the autosampler.
6. SPME CLEANING DEVICE LOCATION (only for HT2850T)
7. According to the instrument mode it can be:
• HEADSPACE MODE:
SYSTEM INTEGRITY TOOL AREA only if the GLP kit has been supplied (see paragraph
1.7.2 “Options“);
• LIQUID MODE:
WASTE VIAL;
• SPME MODE:
FIBER WASHING VIAL.
2.1.1.1 HT2800T/HT2850T Sample rack
In Headspace mode and SPME mode HT2800T mounts a 42-position rack (20,10 or 6ml vials).
Figure 3: 42 position rack (Headspace and SPME)
Each vial is identified with two digits (a letter and a number):
To Next Page
Loading...
