HT2800T_en_c.doc Page 48 of 275
8. Check the product sheet to verify that the autosampler configuration (left or right) is
consistent with your GC (see paragraphs 2.1.1.4 “HT2800T/HT2850T Control panel:
touch screen display”). If the configuration of the autosampler is not correct with
respect to your GC specification, please contact your local supplier.
9. Remove the protection belt and polythene bag from the tower.
Figure 51: Remove the protection belt
Figure
52
: Remove the polythene bag
10. Remove the tower protection.
Figure 53: Remove the tower protection
To Next Page
Loading...
