HTA HT2800T - Page 89

HT2800T_en_c.doc Page 89 of 275
Fiber
lenght
Injection
depth
(mm)
20mm
<20 The instrument moves the needle 1
mm under the vial locator, then
expose Fiber moving only the
plunger.
0-20mm fibre
20<depth<69 The instrument moves the needle
20 mm over the final position, then
moves the plunger to expose 20 mm
of Fiber.
0-49mm needle
20mm fibre
69<depth<77 The instrument moves the needle
until 49 mm, moves the plunger to
expose 20 mm of Fiber and then
from 0 mm to 8 mm of Fiber-holder
to reach the right depth.
49mm needle
0-8mm
Fibre holder
20mm fibre
4.2.1.3 Alignment: Rear Injector
Access sequence: RUN>SETTINGS>SETUP>ALIGNMENT>REAR INJECTOR
Tap “Rear Injector” from the “Setup: Alignment” screen to set the alignment of the rear injection
(see paragraph 4.2.1 “Setup: Alignment”).