EasyManuals Logo

Huawei Quidway S3000-EI Series User Manual

Huawei Quidway S3000-EI Series
383 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #266 background imageLoading...
Page #266 background image
Operation Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches Chapter 5
Access Management Configuration
Huawei Technologies Proprietary
5-3
pass through the
specified port.
C
cified port. Likewise, the packet with specified MAC address can
z
ed only when its source MAC address is the specified MAC
Perf
meanwhile the packet with specified IP address can only
z Port+MAC binding: binding the packet’s receiving port and its source MA
address. The specified port will only allow the packet with specified MAC address
to pass; meanwhile the packet with specified MAC address can only pass through
the specified port.
z Port+IP+MAC binding: binding the packet’s receiving port, source IP address and
source MAC address. The specified port will only allow the packet with specified IP
and MAC address to pass. The packet with specified IP address can only pass
through the spe
only pass from the specified port.
IP+MAC binding: binding the packet’s source IP address and its source MAC
address. If the packet’s source IP address and its specified IP is the same, then
the packet is relay
address. Likewise, if the packet’s source MAC is the same as the specified MAC
address, then the packet is relayed only when its source IP address is the same as
the specified IP address.
orm the following configuration in the system view.
Table 5-3 Binding Port, IP Address and MAC Address
Operation Command
Bin
add
MA
ber } | ip-addr ip }* | ip-addr ip { interface
{ interface-name | interface-type interface-number } | mac-addr
d port, IP
ress and
C address
am user-bind { interface { interface-name | interface-type
interface-number } { mac-addr mac | ip-addr ip }* | mac-addr
mac { interface { interface-name | interface-type
interface-num
mac }* }
Remove the
undo am user-bind { interface { in
interface-number } { mac-addr ma
binding of port,
IP d
MAC address
binding
terface-name | interface-type
c | ip-addr ip }* | mac-addr
mac { interface { me | interface-type
interface-number } | ip-a ip-addr ip { interface
address an
interface-na
ddr ip }* |
{ interface-name | interface-type interface-number } | mac-addr
mac }* }
Note that:
z One MAC add
z
z
m t+ +M P +I
ress or one IP address cannot be bound more than once.
binding number is 128.
“Por IP AC” and “ ort P” on the same port.
The maximum
Do not perfor

Table of Contents

Other manuals for Huawei Quidway S3000-EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3000-EI Series and is the answer not in the manual?

Huawei Quidway S3000-EI Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3000-EI Series
CategorySwitch
LanguageEnglish

Related product manuals