Figure 3-8 Networking diagram of configuring the batch distribution function for an HGMP
cluster
IP/MPLS
core
......
FTP Server
2.0.0.1/8
SFTP Server
2.0.0.2/8
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Administrator-1
10.0.0.1/8
Member-1
Member-2
Member-3
10.0.0.4/8
GE0/0/1 GE0/0/2
GE0/0/1
GE0/0/2
GE0/0/1
GE0/0/1
Cluster
GE0/0/3
GE0/0/1
1.0.0.2/8
Device MAC Address Device MAC Address
Administrator-1 0001-0001-0001 Member-1 0002-0002-0002
Member-2 0003-0003-0003 Member-3 0004-0004-0004
Configuration Roadmap
The configuration roadmap is as follows:
1. Create a cluster according to the steps described in 3.6.1 Example for Configuring Basic
HGMP Functions for a Cluster.
2. 3.6.1 Example for Configuring Basic HGMP Functions for a Cluster
NOTE
l Configure the interconnection of FTP servers and devices in and out of the HGMP cluster in
NAT or non-NAT mode. The following takes the configuration in NAT mode as an example.
l If the system software, patch files, or configuration files, batch distribution can be distributed in
batches without accessing the FTP server out of the cluster, you can skip this step.
3. Configure batch distribution on the administrator switch.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
159
To Next Page
Loading...
Need help?
General
