EasyManua.ls Logo

Huawei Quidway S5700 Series - Page 197

Huawei Quidway S5700 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[HUAWEI_0.Administrator-1-cluster-increment] increment-command command-number 20
command-text ip route-static 2.0.0.0 8 10.0.0.1
After the previous configuration, run the display increment-command command on the
administrator switch to check the list of incremental configuration commands.
[HUAWEI_0.Administrator-1] display increment-command
The content of increment commands:
------------------------------------------------------------------------------
SN Content
------------------------------------------------------------------------------
10 vlan batch 100 to 200
20 ip route-static 2.0.0.0 8 10.0.0.1
Step 11 Deliver the list of incremental configurations command to the specified member switch.
[HUAWEI_0.Administrator-1-cluster-increment] increment-run group-by member-number
2 to 3
Step 12 Verify the configuration.
Run the display cluster-increment-result command on administrator switch to check whether
the list of incremental configuration commands is delivered to the specified member switch, and
you can view that success is displayed.
[HUAWEI_0.Administrator-1] display cluster-increment-result
The result of member switch executing increment commands:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress Result CommandId
------------------------------------------------------------------------------
2 S5700 0003-0003-0003 10.0.0.3 success -
3 S5700 0004-0004-0004 10.0.0.4 success -
----End
Configuration Files
l Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 3
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 10
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
186

Table of Contents

Related product manuals