EasyManuals Logo

Huawei Quidway S5700 Series User Manual

Huawei Quidway S5700 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #207 background imageLoading...
Page #207 background image
SNMP host:3.0.0.1
FTP server:2.0.0.1
SFTP server:2.0.0.2
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : enabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10 Synchronize configuration files.
# Run the configuration synchronization command on the administrator switch, and then member
switches synchronize configuration files to the FTP server (2.0.0.1) in NAT mode.
[HUAWEI_0.Administrator-1] cluster
[HUAWEI_0.Administrator-1-cluster] cluster-plug-play ip 2.0.0.1 username hgmp
password hgmp
[HUAWEI_0.Administrator-1-cluster] increment-config synchronization
Step 11 Verify the configuration.
After the previous configuration, run the display increment-synchronization-result command
on administrator switch to check whether configuration files are synchronized to the FTP server,
and you can view that success is displayed.
[HUAWEi_0.Administrator-1] display increment-synchronization-result
The result of member switchs' synchronization:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
1 S5700 0002-0002-0002 10.0.0.2 success
2 S5700 0003-0003-0003 10.0.0.3 success
3 S5700 0004-0004-0004 10.0.0.4 success
On the FTP server, you can view that the names of configuration files are the MAC address of
member switches, which indicates that configuration synchronization is successful.
----End
Configuration Files
l Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 5
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
196

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S5700 Series and is the answer not in the manual?

Huawei Quidway S5700 Series Specifications

General IconGeneral
CategorySwitch
Operating Temperature0°C to 45°C
Relative Humidity5% to 95% (non-condensing)
SeriesQuidway S5700
Forwarding PerformanceUp to 96 Mpps
Ports24 or 48 x 10/100/1000Base-T ports
Power SupplyAC or DC
Storage Temperature-40°C to 70°C
Fixed GE Ports24 or 48
Uplink Ports4 x GE SFP ports
Routing ProtocolsRIP, OSPF, BGP
ManagementSNMP, RMON, CLI, Web
VLAN4094 VLANs
PoEOptional

Related product manuals