Huawei Quidway S5700 Series User Manual

l IP address of each interface
l IDs of VLANs to which the interfaces belong
l Stratum count of the NTP master clock
l Authentication key and key ID
Procedure
Step 1 Configure the IP addresses of the Switches.
Configure the IP address of each interface according to Figure 4-4.
# Configure the IP address of the VLANIF interface on Switch C.
<SwitchC> system-view
[SwitchC] vlan 10
[SwitchC-Vlan10] quit
[SwitchC] interface gigabitethernet 0/0/1
[SwitchC-GigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchC-GigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchC-GigabitEthernet0/0/1] quit
[SwitchC] interface vlanif 10
[SwitchC-Vlanif10]ip address 3.0.1.31 24
[SwitchC-Vlanif10]quit
# Configure the IP address of the VLANIF interface on Switch D.
<SwitchD> system-view
[SwitchD] vlan 10
[SwitchD-Vlan10] quit
[SwitchD] interface gigabitethernet 0/0/1
[SwitchD-GigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchD-GigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchD-GigabitEthernet0/0/1] quit
[SwitchD] interface vlanif 10
[SwitchD-Vlanif10] ip address 3.0.1.32 24
[SwitchD-Vlanif10] quit
# Configure the IP address of the VLANIF interface on Switch F.
<SwitchF> system-view
[SwitchF] vlan 10
[SwitchF-Vlan10] quit
[SwitchF] interface gigabitethernet 0/0/2
[SwitchF-GigabitEthernet0/0/2] port hybrid pvid vlan 10
[SwitchF-GigabitEthernet0/0/2] port hybrid untagged vlan 10
[SwitchF-GigabitEthernet0/0/2] quit
[SwitchF] interface vlanif 10
[SwitchF-Vlanif10] ip address 3.0.1.2 24
[SwitchF-Vlanif10] quit
[SwitchF] vlan 20
[SwitchF-Vlan20] quit
[SwitchF] interface gigabitethernet 0/0/1
[SwitchF-GigabitEthernet0/0/1] port hybrid pvid vlan 20
[SwitchF-GigabitEthernet0/0/1] port hybrid untagged vlan 20
[SwitchF-GigabitEthernet0/0/1] quit
[SwitchF] interface vlanif 20
[SwitchF-vlanif20] ip address 1.0.1.2 24
[SwitchF-vlanif20] quit
# Configure the IP address of the VLANIF interface on Switch A.
<SwitchA> system-view
[SwitchA] vlan 20
[SwitchA-Vlan20] quit
[SwitchA] interface gigabitethernet 0/0/1
[SwitchA-GigabitEthernet0/0/1] port hybrid pvid vlan 20
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 4 NTP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
237

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional