EasyManua.ls Logo

Huawei Quidway S5700 Series - Page 346

Huawei Quidway S5700 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
Step 1 Create a VLAN and add interfaces to the VLAN.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 10
[SwitchA-Vlan10] quit
[SwitchA] interface gigabitethernet 0/0/1
[SwitchA-GigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchA-GigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchA-GigabitEthernet0/0/1] quit
# Configure Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] vlan 10
[SwitchB-Vlan10] quit
[SwitchB] interface gigabitethernet 0/0/1
[SwitchB-GigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchB-GigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchB-GigabitEthernet0/0/1] quit
Step 2 Configure the VLANIF interface and assign an IP address to the VLANIF interface.
# Configure Switch A.
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] ip address 10.1.1.1 24
# Configure Switch B.
[SwitchB] interface vlanif 10
[SwitchB-Vlanif10] ip address 10.1.1.2 24
Step 3 Enable the NQA client and create an NQA ICMP test.
[SwitchA] nqa test-instance admin icmp
[SwitchA-nqa-admin-icmp] test-type icmp
[SwitchA-nqa-admin-icmp] destination-address ipv4 10.1.1.2
Step 4 Perform the test immediately.
[SwitchA-nqa-admin-icmp] start now
Step 5 Verify the test result.
[SwitchA-nqa-admin-icmp] display nqa results test-instance admin icmp
NQA entry(admin, icmp) :testflag is inactive ,testtype is icmp
1 . Test 1 result The test is finished
Send operation times: 3 Receive response times: 3
Completion:success RTD OverThresholds number: 0
Attempts number:1 Drop operation number:0
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors number:0 RTT Stats errors number:0
Destination ip address:10.1.1.2
Min/Max/Average Completion Time: 1/30/17
Sum/Square-Sum Completion Time: 51/1301
Last Good Probe Time: 2010-06-09 19:27:48.1
Lost packet ratio: 0 %
----End
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
335

Table of Contents

Related product manuals