EasyManua.ls Logo

Huawei Quidway S5700 Series - Page 413

Huawei Quidway S5700 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Statistics entry 1 owned by User01 is VALID.Received :
Interface : GigabitEthernet0/0/1<ifEntry.514>
octets :156 , packets :1
broadcast packets :0 , multicast packets:1
undersized packets :0 , oversized packets:0
fragments packets :0 , jabbers packets :0
CRC alignment errors:0 , collisions :0
Dropped packet (insufficient resources):0
Packets received according to length (octets):
64 :0 , 65-127 :0 , 128-255 :1
256-511:0 , 512-1023:0 , 1024-1518:0
3. # Configure Switch.
# Sample the traffic on the subnet every 30 seconds and save the latest 10 history entries.
[Switch-GigabitEthernet0/0/1] rmon history 1 buckets 10 interval 30 owner
User01
# Verify the configuration. Only the last sampling record is displayed through CLI. To
display all the history records, use the special NMS software.
[Switch-GigabitEthernet0/0/1] quit
[Switch] display rmon history GigabitEthernet0/0/1
History control entry 1 owned by User01 is VALID
Samples interface : GigabitEthernet0/0/1<ifEntry.514>
Sampling interval : 30(sec) with 10 buckets max
Last Sampling time : 0days 01h:56m:21s
Latest sampled
values :
octets :11385 , packets :
0
broadcast packets :0 , multicast packets :
9
undersize packets :0 , oversize packets :
0
fragments packets :0 , jabbers packets :
0
CRC alignment errors :0 , collisions :
0
Dropped packet: :0 , utilization :
0
History
record:
Record No.1 (Sample time: 1days 07h:37m:
29s)
octets :11182 , packets :
0
broadcast packets :0 , multicast packets :
8
undersize packets :0 , oversize packets :
0
fragments packets :0 , jabbers packets :
0
CRC alignment errors :0 , collisions :
0
Dropped packet: :0 , utilization :0
4. Configure the eventTable.
# Set the device to record logs for RMON event 1.
[Switch] rmon event 1 description logevent log owner User01
# Set the device to send Trap messages to the NMS for RMON event 2 and set the
community name to public.
[Switch] rmon event 2 description prialarmevent trap public owner User01
# Display the alarms.
[Switch] display rmon event
Event table 1 owned by User01 is VALID.
Description: logevent.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 7 RMON Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
402

Table of Contents

Related product manuals