Huawei Quidway S5700 Series - Page 88

PoE PSE power source :Unknown
Port PSE Priority :Unknown
Port Available power value:0
# View the neighbor information of SwitchA.
[SwitchA] display lldp neighbor brief
Local Intf Neighbor Dev Neighbor Intf
Exptime
GE0/0/1 SwitchB GE0/0/1 115
GE0/0/2 SwitchB GE0/0/2 115
GE0/0/3 SwitchB GE0/0/3 115
l View the configurations on SwitchB.
Same as information about SwitchA.
----End
Configuration Files
l Configuration file of SwitchA
#
sysname SwitchA
#
vlan batch 100
#
interface MEth0/0/1
ip address 10.10.10.1 255.255.255.0
#
lldp enable
#
interface Eth-Trunk1
port link-type
trunk
port trunk allow-pass vlan 100
#
interface GigabitEthernet0/0/1
eth-trunk 1
#
interface GigabitEthernet0/0/2
eth-trunk 1
#
interface GigabitEthernet0/0/3
eth-trunk 1
#
lldp management-address 10.10.10.1
#
return
l Configuration file of SwitchB
#
sysname SwitchB
#
interface MEth0/0/1
ip address 10.10.10.2 255.255.255.0
#
vlan batch 100
#
lldp enable
#
interface Eth-Trunk1
port link-type
trunk
port trunk allow-pass vlan 100
#
interface GigabitEthernet0/0/1
eth-trunk 1
#
interface GigabitEthernet0/0/2
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 2 LLDP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
77