3–23
Chapter 3. Configuring the Printer
Loading Custom Sets or Factory Default Values
CONFIGURATION
MANAGEMENT
Factory
Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Recall
Custom Set
Save Current
Values
Delete
Custom Set
Change
Power On Set
Protect
Custom Sets
Print Custom
Set V
alues
* = Factory Default
You can load any of the custom set configurations or the factory default
configuration. (Factory default parameters are shown starting on page 3–10.)
The loaded configuration remains active as long as the printer is on. The
following procedure shows how to load factory defaults to the printer.
If you power off the printer, the power-on configuration will load the next
time the printer is powered on. Page 3–25 explains how to select the
power-on configuration.
Step
Key Result Notes
1. Press:
Stop
NOT READY
Places the printer in
NOT READY mode.
2.
Scroll Scroll
+
OPERATOR MENU
UNLOCKED
Unlocks the Operator
Menu, which allows
you to load a
configuration.
3.
Menu
PRINTER CONTROL
OPERATOR MENU
Displays the first
Configuration Main
Menu option,
PRINTER CONTROL.