To Next Page

To Previous Page

4–7

Chapter 4. Configuration Menus

Overview

This chapter describes the configuration menus. The Configuration Main

Menu options and all of the submenu options are illustrated in menu

diagrams and described in detail. For procedures showing how to enter

Program mode, save, recall, and print configurations, refer to Chapter 3,

“Configuring the Printer.”

Figure 4–1 shows an overview of the configuration menus.

NOTE: The menus that are displayed from the operator panel are

determined by the installed features. For example, if you ordered the

IPDS feature, then the IPDS menu would appear on the operator

panel. If the IPDS feature is not installed, then the IPDS menu will

not appear on the operator panel.

In this manual, the Coax and Twinax menus for the Coax/Twinax

feature are documented in Chapter 3, “Configuring the Printer,” and

Chapter 4, “Configuration Menus,” because many customers order

this feature at the factory. The Coax/Twinax interface for the

Multi–Platform Interface Coax/Twinax feature is documented in the

6400 Coax/Twinax Multi–Platform Interface Option Installation

and Operation Guide.

The menus for the IPDS, Code V, and IGP are documented in

Appendix E: Code V, IGP, and IPDS Menus.

Each feature is shipped with a document that describes the feature in

detail. For more information about these documents, see the

“Related Documents” section that begins on page 1–3.

The configuration menu diagrams on the following pages show the structure

of the configuration menus and the parameter options available in each

menu. The diagrams list the menus and options in the order they appear when

you use the operator panel to configure the printer. Factory default

configuration values are indicated by an asterisk (

*).

Pressing the operator panel keys (Enter, Return, Scroll°, and Scroll±)

allows you to move through the menus and select various choices for the

options, as follows:

• The Enter key allows you to move down to a lower level in the

menu structure, and to select an option value as the active value.

IBM 6400 Setup Guide

Other manuals for IBM 6400