C–2
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Host Attachment
The following paragraphs provide information that will help you plan your
attachment of this printer to your system. (Refer to Table C–1 for special
system requirements.)
This printer attaches to the following host devices and workstations:
• AS/400 ASCII Workstation Controller port 9402 (except Model Y10),
9404, and 9406
• 3174 Controller–Asynchronous Emulation Adapter
• IBM Personal Computer and PS/2 Systems–ASCII Serial or Parallel port
• IBM Personal Computer compatible systems–ASCII Serial or Parallel
port
• IBM RISC System/6000–ASCII Serial or Parallel port
• Extended System/9370 ASCII Subsystem
• Micro Channel 370–ASCII Serial or Parallel port
• Non–IBM systems that support ASCII attachments through the following
interfaces: EIA–232–E Serial, EIA–422–B Serial, PC Parallel,
Dataproducts Parallel, and IEEE 1284 Parallel
• Ethernet and Token Ring LANs via the Network Print Server features.
• Ethernet LANs via the 6400 Ethernet feature.
NOTE: When a coax/twinax feature is installed, it attaches to host devices
and workstations that support coax/twinax.
To Next Page
Loading...
Need help?
General