4–16
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
File System
Provides the means for listing, viewing, and manipulating files in flash
memory. The following selections are available.
Overwrite
This selection controls whether the files in flash memory can be overwritten.
With the default selection of Enable, files are overwritten. If the selection is
disabled, the files can not be overwritten.
View Files
This selection provides a list of files in flash memory. Pressing the Scroll
key allows you to view the file size.
Delete Files
This selection provides a list of files in flash memory. Pressing the Enter key
will delete the displayed file from flash memory.
Optimize & Reboot
Pressing the Enter key with this selection displayed will reclaim flash
memory space and reboot the printer.
IMPORTANT
Do not turn the printer off until it has completed the reboot and is either
Ready or Not Ready.
Print File List
Pressing the Enter key with this selection displayed will cause the printer to
print a summary of files stored in flash memory. Statistics on file system
usage are also printed.
Power Stacker
This parameter determines whether or not the power paper stacker is enabled,
which is the default, or disabled. This parameter is not presented if the power
paper stacker is not installed.
To Next Page
Loading...
Need help?
General