IBM 6400 Setup Guide

E–10
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
• Disable. If disabled, it will allow the special font characters to be
expanded.
Inline Graphics
• Enable. Permits Code V graphics to start in the middle of a print line as
opposed to moving to the beginning of the line to start a graphic.
• Disable. The default. Requires the printer move to the beginning of the
line to start a graphic.
Error Handling
Error Messages
• Disable. Suppresses error checking and error messages.
• Enable. The default. Checks command syntax and prints error messages
when command parameters are incorrect.
Error Markers
• Enable. The default. Prints the following error markers for those
elements that print beyond the page boundaries:
>> for elements that begin off the right side
of the page;
<< for elements that begin at the indicated position
but end off the page;
for elements where the starting position of the
command contains an error other than an off–page error.
• Disable. Does not print error markers for those elements that print
beyond the page boundaries.
Off Page Errors
• Disable. The default. Does not report errors for elements that start or end
beyond the right edge of the page.
• Enable. Reports errors for elements that start or end beyond the right
edge of the page.
Bar Code Errors
• Enable. The default. Prints an error message when invalid bar code data
is encountered.

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English