E–26
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Override Host
Override Host determines if the operator panel overrides specified IPDS
menu values.
Select one of the following two values:
• Disable. The default. Does not allow operator panel settings to override
IPDS application commands.
• Enable. Allows operator panel settings to override IPDS application
commands.
The specified IPDS application commands for the IPDS menu values are:
• Graphics Quality
• Bar Code Quality
• Image Quality
NOTE: No other IPDS menu values or printer operator panels are affected
by Override Host. Only the three values listed above are affected.
Graphics Quality
Determines the quality for graphics printing. Override Host must be enabled
to use these settings. Here are the supported resolutions in pels:
• High. Vertical is 144; horizontal is 180.
• Medium. The default. Vertical is 144; horizontal is 120.
• Low. Vertical is 72; horizontal is 60.
NOTE: The higher the resolution selected, the slower the print speed. When
selecting a resolution, try to balance the resolution quality your
application requires with how fast you want the print job to print.
To Next Page
Loading...
Need help?
General