A–3
Appendix A. Printer Specifications
Paper Specifications
NOTE: The following paper specifications are general guidelines. Paper
stock should be tested with applications to determine print quality.
Paper
Type: S Edge–perforated, fan–fold, 3 to 17 inches (7.62 to
43.18 cm) wide*, 2 to 24 inches (5.08 to 60.96 cm)
long**
S Single–part: 15 pound (57 g/m
2
) to 100 pound (377
g/m
2
) stock.
S Multi–part carbon: 1– to 6–part forms, maximum
12 pound (45 g/m
2)
ply of upper plies.
S Multi–part carbonless, maximum of 6–part forms.
Test readability of greater than 4–part forms.
Form Thickness: 0.025 inches (0.064 cm) maximum
Drive: Adjustable tractors (6–pin engagement)
Slew Rate: Fast Slow
6400–050 12 ips 8 ips
6400–P50 12 ips 8 ips
6400–010 20 ips 8 ips
6400–P10 16 ips 8 ips
6400–015 20 ips 10.4 ips
6400–015 w/Stacker 25 ips 10.4 ips
Labels
On Backing: One–part continuous perforated fan–fold back form.
Labels must be placed at least 1/6 inch (0.42 cm)
from the fan–fold perforation. Backing adhesive
must not be squeezed out during printing.
Sheet Size: 3 to 17 inches (7.62 to 43.18 cm) wide*, including
the two standard perforated tractor feed strips. A
maximum sheet length of 16 inches (40.64 cm)
between top and bottom perforations.**
To Next Page
Loading...
Need help?
General