E–17
Appendix E. Code V, IGP, and IPDS Menus
PI Slew Range
You can specify how many lines the paper will feed.
• 15. A paper slew of 1–15 will move 1–15 lines. A paper slew of 0 will
move 1 line.
• 16. The default. A paper slew of 0–15 will move 1–16 lines.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
• Disable. The default. The printer ignores all carriage returns that are not
followed by line feeds.
• Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.
Select Font
This parameter allows you to select a font for the IGP feature. The default is
0, which is U.S. ASCII. Valid selections are 0 to 33. The following
predefined values are available:
0 U.S. ASCII
1 German
2 Swedish
3 Danish
4 Norwegian
5 Finnish
6 English
7 Dutch
8 French
9 Spanish
10 Italian
11 Turkish
12 0858 PC Euro Multilingual
13 0923 Latin 9 8859–15
Values 14–23 are undefined and will default to 0. You can set values 24–31
to specific fonts; refer to the USET command.
To Next Page
Loading...
