3–18
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Changing Parameters
PRINTER CONTROL
Interface
Selection
Display
Language
Alarm
Control
Print Direction
Hex Print
Mode
* = Factory Default
Bidirectional*
Unidirectional
. . .
The following procedure shows you how to change a configuration setting.
Changing the Print Direction from the factory default setting
BIDIRECTIONAL to the setting UNIDIRECTIONAL is provided as an
example. Print Direction is one of the Printer Control menu options. The
procedure is similar for other configuration changes. Use these basic
guidelines to navigate the configuration menus and change other parameters.
NOTE: You can press Start at any time to exit the configuration menu.
Step
Key Result Notes
1. Determine which parameters you want to change, and what their new values should be. (In this example, we are changing the
value of the PRINT DIRECTION parameter from “BIDIRECTIONAL” to “UNIDIRECTIONAL.”)
2. Press:
Stop
NOT READY
Places the printer in
NOT READY mode before
entering the operator menus.
3.
Scroll Scroll
+
OPERATOR MENU
UNLOCKED
Unlocks the Operator Menu,
which allows you to make
configuration changes.
4.
Menu
PRINTER CONTROL
OPERATOR MENU
Displays the first
Configuration Main Menu
option,
PRINTER CONTROL.
To Next Page
Loading...
Need help?
General