E–13
Appendix E. Code V, IGP, and IPDS Menus
PI Control
Printer PI
• Disable. The default. Does not inform the Code V that the ASCII
emulation is configured with the PI line enabled.
• Enable. Informs the Code V that the ASCII emulation is configured with
the PI line enabled.
Host PI
• Disable. The default. The Data Bit 8 configuration option must be
disabled to transmit the PI line to the printer.
• Enable. Informs the Code V that the host sends PI signals.
PI Slew Range
This parameter determines if the range for a paper slew is from 1 through 15
lines or 1 through 16 lines.
• Enable. The default. A paper slew of 0–15 will move 1–16 lines.
• Disable. A paper slew of 1–15 will move 1–15 lines. A paper slew of 0
will move 1 line.
To Next Page
Loading...
Need help?
General