IBM 6400

4–43
Chapter 4. Configuration Menus
Novell Protocol
This option determines whether the Novell protocol will be available. The
selections are as indicated below:
• Enable (the default) makes the Novell protocol available with the
ethernet installed.
• Disable will make the Novell protocol unavailable during printer
operation.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be available. The
selections are as indicated below:
• Enable (the default) makes the NetBIOS protocol available with the
ethernet installed.
• Disable will make the NetBIOS protocol unavailable during printer
operation.
Novell Frame
This selection determines which framing scheme will be used in processing
Novell signals.
• Auto Sensing (the default)
• Ethernet II
• Ethernet 802.3
• Ethernet 802.2
• 802.2 Snap
Printer Manager Port Number
Selects the port to be used by the printer manager. The selectable range is
1023 to 65535, with the default selection of 03001.
Printer Manager Port Timeout
This is the value used by the printer to determine the amount of time before
timing out from the printer manager. The selectable range is 1 to 255
Seconds, with the default selection of 32 Seconds.