E–7
Appendix E. Code V, IGP, and IPDS Menus
Lines Per Inch
Defines the number of lines per inch for the Code V to use. Can also be set
by using the ^@L command. The following number of lines per inch may be
selected:
• 6 The default.
• 7
• 8
• 9
• 10
Graphics Option
Slashed Zero
• Disable. The default. Prints zeros without a slash (0).
• Enable. Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital “O.”
Ignore Dots Value
• Disable. The default.
• Enable. Causes the Code V to expect position values to be specified in
only 1/10 of an inch. If the dot position is also given, it is treated as text.
Append Rotated
• Disable. The default. Appends logos to an alphanumeric string rotated in
a clockwise, counterclockwise, or inverted orientation.
• Enable. When enabled, the logo is treated as a separate element.
Truncate Off Page Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form.
• Disable
• Enable
To Next Page
Loading...
