3–10
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Factory Default Configuration Values
The factory default values are permanently stored as a configuration. They
cannot be modified or erased. The parameters which display depend on which
interface and emulation is installed. The default values for optional features
(IPDS, IGP and Code V) are provided in Appendix E.
Below is a representative factory default configuration based on the twinax
interface. Your factory default configuration will depend on the features
installed in your printer.
POWER ON CURRENT CONFIGURATION – FACTORY CONFIGURATION
IBM Printer Configuration
Reference Number 351939
File Part Number XXXXXXX Date 17–Nov–1997
Base Coax/Twinax Version 2.04D
Base Line Printer+ Version 2.01C
DC V2.04D 17–Nov–97 #351608
EC V2.01D 13–Nov–97 #351594
BOOT/CMX V1.04D 28–Oct–97 #351553
SHUTTLE TYPE 1400
FLASH 2 MB
DRAM 6 MB
SECURITY PAL 154140–017
ETHERNET VERSION VER=6.9.9.29 MOS=1.1.6
CONFIGURATION CODE FC04FF
PRINTER CONTROL
Interface Selection Twinax
Display Language English
Alarm Control Alarm Enabled
Print Direction Bidirectional
Hex Print Mode Disable
Power On State Ready
Paper Jam Detection Enable
Forms Speed Normal Speed
Set Platen at Bottom of Form Disable
Shuttle Timeout 5 Seconds
Energy Saver Timer 15 Minutes
OCR Font Density 120 Dots per inch
Eject/Restore Standard
(5)
PTR Setup Option
Setup Parse Disable
Setup SFCC 21h
File System
Overwrite Files Enable
View File List
Version 69 Bytes
Optimize&Reboot
Print File List
To Next Page
Loading...
Need help?
General