IBM 6400 Setup Guide

3–9
Chapter 3. Configuring the Printer
CONFIGURATION
MANAGEMENT
Current
Custom Set*
Factory Default
Power On Custom Set
All Custom Sets
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Recall
Custom Set
Save Current
Values
Delete
Custom Set
Change
Power On Set
Protect
Custom Sets
Print Custom
Set V alues
* = Factory Default
The Print Custom Set Values selection on the Configuration Management menu
allows you to print any or all of the configurations shown above. The default
setting, “Current Custom Set,” will print the same information as pressing the
Printer Configuration key. The Current Custom Set is the Power On
configuration until you begin modifying the printer configuration.
Custom sets 1 through 4 do not exist until you save configuration parameters
to them. You must define and save a custom set before you can print it.
Custom/Preloaded Sets 5–8 contain configuration sets that assist with the
installation and configuration of this printer.
The other options will only be useful once you have modified and saved the
printer configuration parameter settings.
The Power On Custom Set is defined by the “Change Power On Set” option.
Custom Sets 1 through 8 are defined by the “Save Current Values” option.
These options are described in detail under the Configuration Management
Menu description starting on page 4–18.

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English