1–10
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Built-in Diagnostic Tools
The following diagnostic tools are provided with the printer:
• Comprehensive diagnostic self-tests permanently stored in the printer
• Configuration printout
• Data stream hex code printout
Optional Features
The following features can be ordered and installed on this printer. If you
ordered a feature at the time of purchase, the feature may already be installed
on your printer. Refer to the documentation shipped with the feature for more
details.
For detailed information about these features or for information on ordering a
feature, contact your IBM sales representative or IBM Authorized
Remarketeer.
• IBM Coax/Twinax Attachment:
Enables you to attach this printer to IBM host systems, such as an
AS/400 or S/390. This feature also helps you to replace IBM
coax/twinax printers such as the IBM 3262 Models 3 and 13, IBM 4234
Models 1, 2, and 9, and IBM 5224 Models 1 and 2. This feature can be
used with the Intelligent Printer Data Stream (IPDS) feature which is
described below.
• Coax/Twinax Multi-Platform Interface (MPI) Feature:
Enables you to replace many non-IBM printers that are coax or
twinax-compatibly attached to various IBM systems. This feature also
enables you to attach this printer using both the parallel and coax/twinax
ports. Then, you can submit print jobs using parallel and either coax or
twinax communication protocols.
• IBM Intelligent Printer Data Stream Coax/Twinax:
Provides the ability to create forms, overlays, and graphics. IPDS also
provides compatibility when replacing printers such as the IBM 4234
Models 7 and 11. This feature also supports many versions of the Print
Services Facility* (PSF*). This feature requires the IBM Coax/Twinax
Attachment.
To Next Page
Loading...
Need help?
General