E–3
Appendix E. Code V, IGP, and IPDS Menus
Code V, IGP, and IPDS Menus for Optional Features
If you have installed these features, the following menus can be accessed
from the operator panel. These menus appear only if the feature is installed.
The following sections are brief descriptions of the menu selections for each
feature and are provided here as a quick reference to these feature menus.
For detailed information on these menu selections, refer to the
documentation that was shipped with the feature.
Code V and IGP with twinax require that the IBM Twinax emulation be set
to 4234–2 or 5225.
To Next Page
Loading...
Need help?
General