2–4
6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
b. For Coax/Twinax attachments, follow the instructions in either the
6400 Coax/Twinax Programmer’s Reference Manual or the
Coax/Twinax Multi–Platform Interface Option Installation and
Operation Guide.
c. If you have ordered the Network Print Server feature, follow the
instructions in either the Network Print Server Ethernet
Administrator’s Guide, or the Network Print Server Token–Ring
Administrator’s Guide.
d. If you have ordered the Ethernet Interface, follow the instructions in
the Ethernet Interface User’s Manual.
NOTE: If you are attaching this printer to an AIX host system, use the AIX
Version 3.2.5 and 4.1 print drivers provided on the Configuration
Utility diskette.
6. If you have not already ordered a communications cable, see page A–9.
7. Configure the printer to work with host systems and to match your
emulation, such as IBM Proprinter III XL. Follow the instructions
provided in Chapter 3, “Configuring the Printer,” and review the
information provided in Appendix C, “Host Attachment.”
NOTE: If you are replacing a Printronix printer, such as a P300, with this
printer, make sure you review the information on the Configuration
Utility diskette. The Configuration Utility diskette contains
information that will help you configure this printer to match the
configuration of the printer you are replacing.
8. Install and/or configure optional features by following instructions
provided in the appropriate feature manual. Also, review Appendix E,
“Code V, IGP, and IPDS Menus” for a brief description of the
configuration information for the Code V, IGP, and IPDS optional
features.
NOTE: For more detailed information about any optional feature, refer to
the manual that was shipped with the feature. If you want to order a
manual to learn more about these features, see the “Related
Documents” section that begins on page 1–3.
To Next Page
Loading...
Need help?
General