IDEC SmartRelay functions
4.4 Special functions list - SF
IDEC SmartRelay Manual
132
4.4.1 On-delay
Short description
The output is only set after a configurable on-delay time expires.
Symbol in
IDEC SmartRelay
iring Description
Input Trg A signal at input Trg (Trigger) triggers the on-delay
timer.
Parameter T represents the time after which the output is on (0 to
1 transition of the output signal).
Retentivity:
/ no retentivity
R the status is retentive.
Output is on when the set time T expires, provided Trg is
still set.
4
7UJ
3DU
2Q'HOD\
To Next Page
Loading...
